Skip to main content

Laser-Swipe© Series: Cleaning machines with only light

100% Ecologic and economic Cleaning

Get Rid of Consumables & Go Green

As a green technology, lasersurface cleaning replaces methods that remove rust and dirt with consumables or chemicals.

  • It’s the only solution that meets environmental protection regulations.
  • Plus, pulsed fiber lasers have low power consumption.  
  • Laser surface cleaning does generate only a very small amount of dust in the air.
  • It can be vacuumed instantly with a dust extraction system, which we provide and preconfigure for you if needed.

Laser-Swipe© Series: the only affordable sustainable cleaning solution

Waste-free & sustainable cleaning

The Advantage of Laser Cleaning: It is a long-term solution.

A laser cleaning machine will serve you longer than any scrubber or rust removing chemical will. The laser does not suffer any wear or tear, and thus can be used and reused over its lifetime.

It’s a non-contact, non-abrasive process.

Home remedies are messy and unhealthy. Scrubbing off rusted surfaces exposes you to impurities which could lead to respiratory complications. Laser cleaning, on the other hand, relies on the laser beam to ablate the surface. There is no physical contact between you and the rust.

No use of chemicals.

Rust remover chemicals can get the job done, but the health implications on their use outweigh their benefit. Such chemicals are not only harsh and abrasive but also emit intense fumes. You will need to wear protective gear such as a respirator, goggles and rubber gloves before using them. However, laser cleaning does not rely on any chemical application. It is the better choice as it does not put your health at risk.

No secondary waste is produced.

Scrubbing off rust from surfaces only disintegrates the rusty particles from the substrate, leaving you with a toxic lump of rust dust at the end of the process. Electrolysis leaves the rust particles floating in the water, which you later have to dispose of. In comparison, laser cleaning is a cleaner process as the rust particles are either vaporized or turned into plasma, leaving no evidence of waste.

High precision.

The focused laser beams have an extremely precise focal edge, allowing you to ablate rust from tough spots that would otherwise be harder to clean with other apparatus. Such include the rust that develops around bolts and rails. Additionally, the high precision allows you to focus the laser beam repeatedly over a specific area to achieve the required depth and result.

It’s effective on all surfaces.

Unlike other rust removal procedures, laser cleaning works on all surfaces that are prone to rusting, including stones, concrete, iron, aluminum (bauxite) or copper.

It does not degrade the substrate.

Scrubbing rusted surfaces significantly degrades the substrate due to friction. Rust removing chemicals, on the other hand, are harsh and corrosive, causing wear and tear that could spoil delicate metals or even weaken their robustness. Laser cleaning in comparison ablates the surface while leaving the substrate untouched.

Environmentally friendly cleaning

Neither cleaning media nor abrasives are required

When cleaning with laser radiation, dirt and cover layers are removed in an environmentally friendly way only by bundled light. Neither cleaning media nor abrasives are required. Energy consumption can be reduced by up to 87 %. This means that valuable resources can be saved to a considerable extent both in production and in the use of equipment technology.


  • No blasting agents and chemical cleaning agents
  • Energy savings (up to 8 times lower than with conventional processes)
  • No solvents (climate protection)
  • No distribution/mixing of blasting material and ablated particles
  • Direct extraction and thus safe and homogeneous disposal
  • Saving of transports through decentralized cleaning
  • Saving on masking stickers etc.



As global environmental issues become more severe, the demand for industrially clean products and equipment in the global market is increasing year by year. The quality and cleanliness of cleaning/washing machine equipment and its impact on the environment are becoming increasingly important. As product quality continues to improve, its assessment of environmental impact is normal, and many industries are investigating how to optimize the cleanliness of automated linear production.
Laser cleaning has been proven to fully achieve this goal and highlight its excellence. The infrared light emitted by the laser can be used to clean residual residues on the metal surface, produce residues and oxide residues on steel, aluminum, stone, copper and other substrates. In the case of the original temperature, the surface deposits can quickly absorb the laser energy and peel off from the surface of the object, while the surface remains intact, the cleaning process can be done by hand-held laser or using a robotic arm.
Laser technology, and more specific Fiber Laser Technology is just emerging as a new technology. Laser cleaning technology has gradually replaced traditional chemical cleaning and contact physical cleaning technology. It is slowly developing into the mainstream technology of industrial cleaning. Compared with traditional cleaning methods, laser cleaning does not use any chemical, dry ice and other cleaning media to avoid secondary pollution, which means that our cleaning method is green and environmentally friendly. In addition, laser technology is one of the few cleaning technologies for automated industrial cleaning, reducing operating costs, improving cleaning quality, and meeting market demands.


Comparison Item

Laser Clean

Chemical Clean

Dry Ice Clean

Mechanical Clean

Ultrasonic Clean


Cleaning Method

By Laser, non-contact

Chemical reagent, contact material

Dry ice, non-contact

Mechanical Abrasive contact material

Cleaning agent, contact material

Special sand particles








Cleaning Efficiency








Only electricity

Chemical reagent

Dry ice

Sandpaper, Grinding wheel, abrasive stone/etc.

Special cleaning fluid

Special sand particles

Cleaning Effect

Excellent, high cleanness

Ordinary, uneven

Good, but uneven

Ordinary, uneven

Good, but less cleanliness

Ordinary, uneven


Precise control, high precision

Not control, very low precision

Not control, very low precision

Not control, medium precision

Cannot specify a range to clean

Cannot specify a range to clean

Safety/Environmental protection

No any pollution

Seriously polluting environment

No pollution

Polluting environment

No pollution

Polluting environment


Manual Operation

Easy operation, hand-held or automatic

Complicate operation, high requirements to workers, pollution protection measures needed.

Easy operation, hand-held or automatic

Expend labour, pollution protection measures needed

Easy operation, but need to add consumables manually

Expend labour, pollution protection measures needed


Cost Input

Higher initial cost, no consumables, very low maintenance cost

Low initial cost, very high consumables cost

Medium initial cost, high consumables cost

High initial cost, high consumable and labor costs

Low initial cost, medium consumables cost

High initial cost, high consumable and labor costs


Laserreiniging in belgië- laserreinigen in Nederland - laser cleaning in the UK - laser cleaning in Ireland - laser cleaning in South Africa - laser skoonmaak in Suid-Afrika -  nettoyage laser en France - nettoyage laser en Belgique - nettoyage laser au Luxembourg - Laserreinigung in Deutschland - Laserreinigung in Österreich - limpieza láser en españa - pulizia laser in italia - limpeza a laser em portugal - Laser cleaning in scotland - laserrensning i danmark  - curățarea cu laser în Romania - nettoyage laser en Suisse - Laserreinigung in der Schweiz - laser bidezko garbiketa espainian - limpieza laser en españa - laserové čištění v česku - Laserové zváranie na slovensku - lasersko čiščenje v sloveniji - lasersko čišćenje u hrvatskoj - lasersko čišćenje u bosni - ласерско чишћење у србији - лазерно почистване в българия - καθαρισμός με λέιζερ στην Ελλάδα - czyszczenie laserowe w polsce - лазерне чищення в україні - лазерная чистка в украине - laserpuhastus valges venemaal - Лазерная зварка ў Беларусі - лазерная чыстка ў белай расіі - laserpuhdistus Suomessa - laserrengöring i sverige - laserrengjøring i norge - Laser cleaning in united states - Laser cleaning in canada - nettoyage au laser au Canada - türkiye'de lazer temizleme - ניקוי לייזר בישראל